Home >> USB >> Host Link & Ethernet Converter


USB 2.0 to Fast Ethernet Converter & USB 2.0 to Gigabit Ethernet Adapter
Introduction

USB 2.0 to Ethernet Adapter and USB 2.0 to Gigabit Ethernet Adapter are high performance and low cost solution. They enables an Ethernet network connection capability for desktops, notebook PC's with standard USB port. They resolves the trouble on the computer without Ethernetport that you can also connect from a computer to Ethernet through USB 2.0 easily

USB 2.0 to Fast Ethernet Converter
a

Part Number 30U2-10-MB872

Features
  • Supports 10/100 Mbps auto-sensing
  • Supports USSB specification 1.0, 1.1 and 2.0
  • Supports 802.3 10BASE-T/100BASE-TX
  • Supports twisted pair crossover detection and auto-correction (HP Auto-MDIX)
  • Supports the following Operating Sysem:
    Windows: Windows 7, Windows Vista, Windoes XP;
    Mac: Mac OS X 10.4/10.5/10.6
 
USB 3.0 to Gigabit Ethernet Adapter
a

Part Number 30U3-20-AX179

Features
    • Integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0, 2.0 and 1.1
    • Supports all USB 3.0 power saving modes (U0, U1, U2, and U3)
    • Supports USB Super/High/Full Speed modes with Bus-power or
      Self-power device auto-detect capability
    • Supports IEEE 802.3az (Energy Efficient Ethernet)
    • Supports parallel detection and automatic polarity correction
    • Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading
    • Supports TCP Large Send Offload V1
    • Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
    • Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding
    • Supports Jumbo frame
    • PHY loop-back diagnostic capability
    • Support Wake-on-LAN Function
    • Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft
    • Wakeup Frame and external wakeup pin
    • Support windows 8, windows 7, windows vista, Apple 10.6 and Apple 10.8

USB 2.0 Host Link Network Bridge Cable
 


Part Number 10U2-16006
System Requirements
  • Intel Pentium 133Mhz or better base computer
  • Windows 7, Windows 98, ME, 2000, XP or above
  • One standard USB 2.0 (recommended) or 1.1 port
Introduction

USB 2.0 Host Link provides an USB-based networking solution for two or more USB hosts of PC/Notebook. USB 2.0 Host Link is a low power solution with built-in two USB 2.0 transceiver/controllers with embedded ping-pong for optimized output.Through host Link proprietary auto detecting and switching method between USB High Speed.
Features
  • Full Compliance with USB specification Ver 2.0/1.1
  • Properiatary auto detecting and switching design to support 3 kinds of transfer operations;
    “HS v. HS”, “HS v. FS”, “FS v. FS”
  • Built-in high-performance micro-controller for USB interface and flow control
  • Connect two or more computers together as a network up to 480 Mbps via USB 2.0 ports
  • No external power and low power consumption
  • Easy Plug & Play onstallation
  • Support TCP/IP Protocols
  • Certification: FCC, CE


     
          
          
     

All rights Reserved ©2009-2012 Comtop Connectivity Solutions Inc.

all words
any words
exact phrase
ACDCPowerCable
ACDCPowerCable
ACDCPowerCable
ACDCPowerCable
ACDCPowerCable
ACDCPowerCable